LitaElek 10m 4 Pin LED Strip Light Connector RGB Connector RGB LED Extension Cable Ribbon Cable for RGB 5050 3528 LED Light Strip w/ 2x Male 4 Pin Plugs (10m/33ft)
- "LitaElek" is the ONLY Authorized seller of "LitaElek" branded products. Any other sellers of LitaElek branded products is illegal.
- Compatible with - 5050/3528/2835 RGB LED Strip. Material: PVC insulation outside, pure copper wires inside.
- Plug & Play - The cable has already been soldered with a female 4-pin interface on each end. There is also 2 Male 4 Pin Male in one pack. So you can directly connect this cable to the 5050/3528/2835 RGB LED Strip or IR/RF Controller without soldering.
- Flexible and durable: The copper wires inside are stranded, so it can take a lot of flexing without breaking.
- Multifunction - Function1:Connect between IR/RF Controller and 5050/3528/2835 RGB LED strips, to extend your LED strips to the ideal location where you'd like to install; Function2:Connect between RGB LED strips, making it possible to install your multiple RGB LED strips in your preferred locations. So, you can remotely control them. Function3:If you are not using RGB, you can split the wires in sets of 2s and basically double the lengths.
"LitaElek" is the ONLY Authorized seller of "LitaElek" branded products. Any other sellers of LitaElek branded products is illegal.
This cable consists of 4 individual 22 AWG wires.
Each end of the extension cable has been carefully pre-soldered with a female connector, and 2 male 4 pin plugs are included in the package, so you can directly plug this 10m/33ft extension wire to your RGB LED strips or IR/RF remote controller to get them connected, without the hassle of using a wire cutting/stripping tool to sold them together.
It functions as a perfect accessory for your LED strips or some other devices.
Function1: Connect between IR/RF Controller and 5050/3528 RGB LED strips, to extend your LED strips to the ideal location where you'd like to install.
Function2: Connect between RGB LED strips, making it possible to install your multiple RGB LED strips in your preferred locations. So, you can remotely control them.
Function3: If you do not need the presoldered female connectors, you can just cut them off, so that you can use the wire to solder.
Function4: If you are using single color LED strips, you can cut off the 2 pre-soldered connecors and split this 10m wire in sets of 2s (basically double the lengths) to fit your single color LED strip.
1x 10m/33ft extension cable with 2 pre-soldered female connectors
2x male to male 4pin plugs
If you need more 4-pin male plugs, please search the following ASIN on Amazon:
ASIN: B01972KNXU (Black)
ASIN: B01FJS6DZS (White) RF plug