1byone Amplified Digital Indoor HDTV Aerial with Built-in Amplifier, 30dB Enhanced Reception, TV Aerial for HDTV / DVB-T Receiver, VHF / UHF / FM, Digital Freeview and Analog TV Signals. Flat Panel Design

1byone Amplified Digital Indoor HDTV Aerial with Built-in Amplifier, 30dB Enhanced Reception, TV Aerial for HDTV / DVB-T Receiver, VHF / UHF / FM, Digital Freeview and Analog TV Signals. Flat Panel Design

Product Description
Package Contents:

1. Antenna with attached 1.25 meters cable
2. AC / DC power adaptor 6V
2. AC / DC power adaptor 6V

Set up Guide:

Step 1: Connect the end (IEC- male) of attached coaxial cable to the ANT / IN connector on the back of the TV or DVB-T tuner.
Step 2: Connect the external adapter to the DC jack at the antenna back and plug it to the wall socket. Or you can get the 5V power from antenna receiver through antenna cable.
Step 3: In the TV’s setup menu, set the tuner mode to “Aerial” or “Air”. Refer to the TV manual for detailed instructions.
Step 4: In the TV’s setup menu, set TV to “scan” for channels. This can sometimes be listed as auto-program, auto-scan, channel search or channel scan. Consult the TV manual for detailed instructions
Step 5: If reception is sporadic, try moving the aerial to another location and rescanning the TV until optimal position is found.

Note:

1. Placing the aerial higher or close to/in a window may result in better reception. You must rescan whenever you move the aerial.
2. If you use a flat HDTV, pls go through your TV manual to make sure your TV is with built-in tuner for freeview.
3. Make sure you are using a HD receiver; otherwise no HD channels can be picked up. Pls read receiver manual.
4. You should retune your Freeview TVs and digital receiver from time to time to ensure you are receiving all available services. Retuning takes only a few minutes and can be done with your remote control.

Price: £9.99

  • 30dB High Gain Reception – Built-in amplifier boosts signal strength and improves reception.
  • Easy Operation – Fast and easy set up in 3 steps – Unwrap, Plug in, and Scan channels.
  • Attractive Elegant Design – Handsome black flat panel fits your home decor; looks great in any room.
  • Proper 1.5m cable – Easy and flexible positioning for best reception and Minimize the loss of signals.
  • Power Supply Included – Powered by external power adapter (DC 6V) included in the package.

Leave a Reply

Your email address will not be published. Required fields are marked *