PICcircuit iCP12 – USBStick [PIC18F2553 Board with USB Oscilloscope, PC DAQ, Data Logger]


Product Description
usbStick is a mini size 28 pin USB PIC IO board with 13x input, output, analog, pwm pins. Great tool for signals monitoring (as oscilloscope), data acquisition and circuit troubleshooting at 1mSec/samples period & 1mV Resolution.

Peripheral Features:
• 13x IO Port (6x 12bit ADC pins, 2x 10 bit PWM/Freq/DAC pins)
• Serial port emulation (UART Baud Rates: 300 bps to 115.2 kbps)
• Maximum Voltage: 5Vdc
• 100mA current output at VDD pin with over-current protection
• 20MHz oscillator
• Green LED - power on indicator
• 2x LEDs (Green, Red) - status indicator
• ICSP Connector - on-board PIC programming
• Switch Mode Selection - Boot or Normal mode

SmartDAQ v1.3 Features:
• Sampling channel: 6x Analogs (12 bits ADC / 1mV Resolution) + 7x Digitals (Input/Output)
• Maximum Sampling rate: 1KHz or 1mSec/Samples
• Sampling voltage: 0V - 5V (scalable graph) at 5mV Resolution
• Sampling period:
• mSec: 1, 2, 5, 10, 20, 50, 100, 200, 500
• Sec: 1, 2, 5, 10, 20, 30
• Min: 1, 2, 5, 10, 20, 30, 60
• Trigger Mode: Larger, Smaller, Positive edge, Negative edge
• Sampling Mode: Continuous, Single
• Logging Function:
• Save Format: Text, Graphic, Both
• Start Time: Normal, Once Trigger, 24-Hour Clock (Auto Run)
• End Time: Unlimited, Data Size, 24-Hour Clock (Auto Stop)

Accessories List:
• 28 Pin PIC: PIC18F2553
• Preloaded Firmware
• iCP12 firmware can be updated using Microchip USB HID Bootloader via USB port
• NO programmer is required!

Add To WishlistPrice: £28.86
  • Mini size, easy interfacing, high performance and user friendly device. Integrated with pic18f2553 28-pin flash usb pic mcu.
  • 13x io port (6x 12bit adc pins, 2x 10 bit pwm/freq/dac pins), serial port emulation (uart baud rates: 300 bps to 115.2 kbps), 5Vdc maximum voltage, 100mA current output at Vdd pin with over-current protection.
  • Preloaded with HID bootloader and iCP12 DAQ firmware. Supported by Android Apps.
  • Free SmartDAQ software with 13 sampling channel [6x analogs (12 bits adc/1mV Resolution) + 7x digitals (input/output)] at 1kHz or 1mSec/samples maximum sampling rate. Sampling voltage: 0v - 5v (scalable graph) at 1mv resolution.
  • Free softwares provide: SmartDAQ, ioControl, serialComm, pwmGenerator, adcStream

One comment

  1. 5.0 out of 5 stars
    useful device, 20 Mar. 2017

    By erudite

    Verified Purchase(What is this?)

    This review is from: PICcircuit iCP12 – USBStick [PIC18F2553 Board with USB Oscilloscope, PC DAQ, Data Logger]

    A useful item for the lab/workshop. A small device that is easy to install and use. Download the zipped software from “piccircuit.com” and use!
    I hope to use the datalogger for monitoring the environment (using thermistors, diodes, LDRs’ etc, for no-frill sensors) The sampling time is in the mSecs range but is fast enough for me. The input range is from 1mV to 5V but can be improved by using op-amps from AMAZON. The delivery time was worth the wait, and the company were very helful when I had a request. On the whole, a nice piece of kit.

    Help other customers find the most helpful reviews 

    Was this review helpful to you? Yes
    No


    | Comment Comment

Leave a Reply

Your email address will not be published. Required fields are marked *